welding supplies aberdeen
WELDING PARTNERS PLASMA CUTTING AUTOMATION

Welding Electrodes Specification

CAST IRONS
WB1500E
AWS A5. 15:ENi-CI
Low strength weld for cast iron. Deposits almost pure nokel which is fully machineable. Narrow fusion zone thus heat affected areas are minimal. Smooth quiet arc.
WB1600E
AWS A5. 15:ENiFE-CI
Deposits a nickel-iron alloy on high-strength nickel bearing cast irons as well as ordinary grey irons. Ideal for welding mild steel to all grades of cast iron. Machinable.
WB1700E
AWS A5. 15:ENiCu-B
Deposits a medium-strength nickel-copper alloy for cast irons giving a machineable deposit with good colour match.
MILD & MEDIUM TENSILE STEELS
WB2000E
AWS A5. 1:E6013, BSEN499:E42AR12, LRS1
Easy to use contact electrode, recommended where a neat weld appearance and high quality finish is required.
WB2020E
AWS A5. 1:E6013, BSEN499:E420R12
Rutile coated electrode with a soft arc, low spatter, self lifting slag. Can be drawn out to a very great weld lengths at high speed minimising distortion
WB2024E
AWS A5. 1:E6013, BSEN499:E422R12, LRS3Y
Specifically designed for vertical and overhead welding and primarily for end users who prefer on electrode for all positions.
WB2044E
AWS A5. 1:E6013, BSEN499:E42ARC15
Particularly suited for vertical-down welding due to its quick-freezing slag, this electrode uses the same current settings in any position. Excellent for poorly-fitting work.
WB2092E
AWS A5. 1:E7024, BSEN499:E423RR74
Rutile iron powder electrode for the welding of mild steel by the contact welding method. Very fast welding in the downhand and standing fillet positions. Nominal 180% recovery.
MILD,MEDIUM AND HIGH TENSILE STEELS
WB2116E
AWS A5. 1:E7016-1, BSEN499:E465B12H5
Thinly coated low-hydrogen electrode for all positional welding yielding weld metal of very high impact values. Especially suitable for making full penetration welds in all positions such as in pipes and overhead butt joints. Recommended for unalloyed, micro alloyed and low-alloyed steel of the medium tensile class.Widely used for offshore fabrication.
WB7018-1
AWS A5. 1:E7018, BSEN499:E464B32H5
All positional electrode suitable for root-pass welding having a nominal recovery of 120% and good impact values at -30ºC. Excellent weld finish.
WB2218E
AWS A5. 5:E8018-G
All-positional electrode having an efficiency of 110-120%, used for the welding of low alloy steel of tensile strength 550/600N/mm2 such as RQT 500.
WB2518E
AWS A5. 5:E11018-M
All-positional electrode for welding steels with a tensile strength of 750/850 N/mm2 such as T1 and RQT 700. Nominal 110% recovery.
HIGH STRENGTH LOW ALLOY STEELS
WB12018-G
AWS A5. 5:E12018-G
Basic lowhydrogen electrode for the welding of HY80 and HY100 steels.
MANGANESE MOLYBDENUM HIGHER STRENGTH STEELS
WB7018-A1
AWS A5. 5:E7018-A1, BSEN1599:EMoB32HS
Thinly coated low-hydrogen electrode for all positional welding yielding weldmetal of very high impact values. Especially suitable for making full penetration welds in all positions such as in pipes and overhead butt joints. Recommended for unalloyed, micro alloyed and low-alloyed steel of the medium tensile class. Widely used for offshore fabrication.
WB10018-D2
AWS A5. 5:E10018-D2, BSEN757:E625MnMoBH32H5
As Above
HIGHER STRENGTH, NOTCH TOUGH STEELS AND LOW TEMPERATURE STEELS
WB7018-G
AWS A5. 5:E7018-G, BSEN499:E506Mn1ni:B32H5
Low alloy, low hydrogen electrode for all positions. Suitable for off-shore construction in steel such as BS4360-50D.
WB8016-G
AWS A5. 5:E8016-G, BSEN499:E506Mn1ni:B12H5
Low alloy, low hydrogen electrode for all positions. Suitable for off-shore construction in steel such as BS4360-50D.
WB8018-C1
AWS A5. 5:E8018-C1, BSEN499:E5061Ni:B32H5
Basic low hydrogen, electrodes depositing 2% Ni weld metal. high impact and good C.T.O.D. values.
WB8018-C2
AWS A5. 5:E8018-C2, BSEN499:E5063Ni:B32H5
Basic low hydrogen electrodes for the welding of 3%mickel steels, fine grained steels. Suitable for operating temps to 101ºC.
WB8018-C3
AWS A5. 5:E8018-C3, BSEN499:E4641Ni:B32H5
Basic coated electrode for higher strength C-Mn, low alloy and weathering steels.
CHROMIUM-MOLYBDENUM CREEP-RESISTING STEEL
WB8018-B2
AWS A5. 5:E8018-B2, BSEN1599:ECrMo1B32H5
A Basic low hydrogen electrode for the welding of 1 Cr-Mo steels
WB9018-B3
AWS A5. 5:E9018-B3, BSEN1599:ECrMo12B32H5
Basic low hydrogen electrode for the welding of 2 Cr-1Mo steels.
WB504-18
AWS A5. 5:505-16, BSEN1599:ECrMo9B42H5
Basic low hydrogen electrodes to match steels of similar compositions used in high temperature and corrosion resistant applications. Can be used in all positions. Nominal 110% recovery
MARTENSITIC STAINLESS STEEL
WB4202E
AWS A5. 4:E410NiMo-26, BSEN1600:E134R53
Rutile electrode for joining and repair of CA6 NM castings
WB4212E
AWS A5. 4:E410NiMo-25, BSEN1600:E134R63
Basic electrode for joining and repair of CA6 NM castings
WB4303E
AWS A5. 15:ENi-CI
A Rutile electrode for repair and joining of martensitic, precipitation hardening Cr-Ni stainless steels such as FV520 and 17/4 PH.
STANDARD AUSTENITIC STAINLESS STEEL
WB4404E
AWS A5. 4:E308L-16, BSEN1600:E199L12
For 304L type steels used in corrosive environments up to 300ºC Ferrite=3–10FN range.
W84422E
Data Sheet
AWS A5. 4:E347-16, BSEN1600:E199NbR12
Niobium-established electrodes for 304, 321 and 347 materials togive freedom from intergranular attack. Ferrite=4–12FN range
WB4505E
AWS A5. 4:E316L-16, BSEN1600:E19123LR12
For 316L steels used in chemical process plant. Corrosion resistant up to 400ºC. Ferrite=3–10FN range
TYPE 309 & 310 STAINLESS STEELS
WB4555E
AWS A5. 4:E309L-16, BSEN1600:E2312LR12
For cladding mild steel to give 308/308L deposit with Ferrite= 8-20FN range and for mixed stainless steel to mild steel welding.
WB4560E
AWS A5. 4:E309Mo-16, BSEN1600:E23122LR12
For cladding of mild steel to give 316/316L deposit with Ferrite= 15-30FN range and for mixed stainless steel to mild steel welding.
WB4707E
AWS A5. 4:E310-16, BSEN1600:E2520R12
25Cr 20Ni fully austenitic deposrt for type 310 steelswith up to 0.2% carbon. Can be PWHTwith no loss of properties.
DUPLEX & SUPER AUSTENITIC STAINLESS STEELS
WB4445E
BSEN1600:E2594NLR12
All positional electrode for the welding ofW bearing Super Duplex Alloys. 30-60% Ferrite.
WB4545E
AWS A5. 4:E2209-16, BSEN1600:E2294NLR12
For welding SAF2205®DIN1.4662 and similar alloys with 30-60% Ferrite.
WB4645E
AWS A5. 4:E2553-16, BSEN1600:E259CuNLR12
For welding high strength duplex alloys with 30-60%Ferrite such as Zeron 25(R)®.
DISSIMILAR & MIXED WELDING STAINLESS STEELS
WB4405E
AWS A5. 4:E308Mo-16, BSEN1600:E20103R12
Crack resistant deposit for welding armour plate and for joining medium tensile steels with little or no preheat. Not heat-treatable.
WB4480E
AWS A5. 4:E307-26, BSEN1600:E189MnMor53
Crack resistant deposit with 4.5% Mn for joining repair and surfacing of austenitic manganese steel. Also for surfacing and joining mild, hardenable or stainless steel to each other.Welds can be heat-treated without loss of properties.
WB4606E
AWS A5. 4:E312-16, BSEN1600:E299R12
All positional electrode suitable for the welding of problem and dissimilar steels.
NICKEL BASE ELECTRODES
WB5505E
AWS A5. 11:ENiCrFe-3
For creep and heat-resistant materials, transition joints, cryogenic service, such as Inconel 600, 601®.
WB5515E
AWS A5. 11:ENiCrFe-2/4
For welding Inconel 600®, Incoloy 800®, Incoloy DS®, Nilo®, Brightray® and other nickel base or high nickel alloys.
WB5525E
AWS A5. 11:ENiCrMo-5
For Hastelloy® ’C’, resistant to wet acid corrosion.
WB5535E
AWS A5. 11:ENiCrMo-3
For welding inconel 625®.
PIERCING & CUTTING
WB8908E
For the cutting, grooving and piercing of most steels without additional air or oxygen.
OVERLAYING & SURFACING
WB9109E
DIN 8555:E1-UM-350-G, Hv350
Rutile/basic electrode giving a deposited hardness of 300/400Hv. Machineable.
WB9119E
DIN 8555:E2-UM-55-CGP, Hv650
Rutile coated electrode depositing martensitic weld metal with finely divided chromium carbides.Weld as deposited 600/750Hv.
WB9229E
AWS A5. 13:EFe5-B
High chromiumbasic coated electrode. Optimumabrasion resistance due to chromium carbide particles in a ledeburitic matrix 850Hv.
WB9299E
AWS A5. 13:EFe5-B, Hv850
Complemartensitic alloy for both hot and cold work applications resisting softening up to 550ºC. 700/750Hv.
WB9338E
AWS A5. 13:EFeMn-A, Hv250
Basic coated electrode depositing fully austeniticweldmetal. Aswelded the hardness is 250HV but increases to 500HV on work hardening.
MEDIUM CARBON LOWALLOY STEELS
WB8016-B5
Data Sheet
AWS A5. 5:E8016-B5
Basic electrode to match 0.5Cr - 1Mo castings.
COPPER BASED ALLOYS
WB6606E
AWS A5. 6:ECuSn-A
For welding phosphor-bronze to steel or itself. Also cast irons.
WB6707E
AWS A5. 6:ECuAl-A2
For standard aluminium bronzes, brasses overlays etc.
WB Alloy Welding Products
MIG Wire
TIG Wire
Welding Electrodes
welding supplies aberdeen