Mig Welding Wire
Flux Cored Non & Low Alloyed
Metal Cored Non & Low Alloyed
Cored Wire Creep Resisting Steel
Stainless Steel Cored Wires
Steel Non & Low Alloyed
Stainless Steel
Nickel & Copper Alloy
Tig Welding
Non & Low Alloy Steel
MMA Welding
Non & Low Alloyed
Repair & Maintenance
SAW
Sub Arc Wire & Flux
Welding Equipment
Fume Extraction
Weco Welding Machines
Welding Carriages
Augmented Realty Welding
Laser Welding & Cleaning
Orbital Welding
Tip Tig Welding
Stud Welding
Weld Monitoring
Data Logging Weld Monitor
Gas Logging and Monitoring
Pipe Equipment
Pipe Beveling Machines
Pipe Stands
Welding Rotators
Welding Positioners
Cutting Equipment
Plasma Cutting
Gas Cutting Oxy / Fuel
PPE
Air Fed Welding Helmet
Other
Fit Up Gear
Weld Cleaning Machine
Vacuum Lifting
Flame Retardant Polyester
Site Services
Welding Machine Repair
Calibration
LEV Test
Heat Treatment
HAVS Testing
PAT Testing
CP7 Test
Abrasive Wheel Training
Welder Training Services
Welding Training Courses
Augmented Welding
Welding Labour Resources
Welder Engineering
Welder Qualification Testing
Specification and Qualification of Welding
WB59T is TIG wire for the welding Ni-Cr-Mo base alloys
WB59T is extensively used in the offshore / marine industry. Excellent pitting resistance.
WB61T is a TIG wire for the welding of nickel base alloys.
WB61T is extensively used for the welding and repairing of heat exchangers, piping vessels and evaporators. Also, a popular choice within the chemical process industry.
WB617T is TIG wire for the welding nickel base alloys, and dissimilar material combinations
Used mainly for welding and repairing nickel base alloys such as Inconel 617ã, Nicrofer 5520Co, Inconel 601.
Copper-Nickel, solid TIG wire
WB67T is suitable for the repair and welding of CN103-CN107, CA 715UNS C71500 and similar cupronickel alloys.
This alloy is commonly used in the age hardened condition to increase strength.
WB82T SC is a nuclear grade, super clean TIG wire for the welding nickel base alloys, and dissimilar material combinations
WB82T SC is extensively used in the offshore / marine industry. Excellent pitting resistance.
Copper-Nickel, solid TIG wire with typically 86% Cu and 10.5% Ni.
WB67T is suitable for the repair and welding of C70600, C96200, Cunifer 10 and similar cupronickel alloys.
WB625T is a TIG wire for the welding nickel base alloys, overlaying carbon steels and combinations of the both
WB625T is extensively used in the offshore / marine industry. Excellent pitting resistance (PRE=50).
WBC27T is a Phosphor bronze TIG wire for improved colour match on brass and bronze.
Ultimate Tensile Strength N/mm2 320 Properties 0.2% Proof Stress MPa - Elongation on 4D % - Hardness BHN 120 Melting Range ºC 850-1000.
Solid wire for TIG welding Ni/Cu alloys
WBNiCu-7T wire is suitable for welding material of similar composition to itself and others in the Ni-Cu/Cu-Ni families to Nickel 200
