Steel MiG Welding Wire 

WB100S-G is a solid wire for the welding of high strength steels. Widely used for the welding of steels with a tensile strength of 700/800 N/mm², such as RQT600, HY80 and NAXTRA 70

WB120S-G is a solid MAG wire for the welding of high strength steels such as HY80, HY100 and other high yield alloy steels where the weld metal properties must match those of the parent material after normalising followed by quenching and tempering

Suitable for welding and repairing most C-Mn steels.

​

​

​

Suitable for welding and repairing most C-Mn steels.

​

​

​

WB6012 is suitable for welding Cor-Ten type weathering steels.  WB6615ER is suitable for welding 

​

​

WB6013 is a solid wire for the welding of low temperature steels such as A333 Grade 6 or equivalent, with excellent notch toughness values down to -60°C.

​

WB6040 is a solid MIG/MAG wire for the welding of low temperature steels down to - 50°C. The balanced Manganese and Silicon ensures optimum deoxidisation and weld fluidity.

​

High strength wire for welding high strength steels with good sub-zero notch toughness in the PWHT condition

​

​

WB6042 is suitable for welding 1.25%Cr 0.5%Mo creep-resisting steels. The balanced Manganese and Silicon ensures optimum deoxidisation and weld fluidity.

​

​

WB6047P is a solid MIG wire for the welding of medium/high strength steels. Widely used for the welding of steels with a tensile strength of 600/700 N/mm², such as RQT600, HY80 and NAXTRA 70. Hardness <235BHN.

​